Viessmann VITODENS, Руководство по эксплуатации, Страница: 20 / 56

20
Example shown:
■ Time program for Monday to Friday
( "Mo-Fr" )
■ Time phase ! :
From 05:00 to 08:30 h
■ Time phase ?
:
From 16:30 to 23:00 h
Heating
Select with
(
HC1
Mo-Fr
?
16:30 - 23:00
u
0 2 4 6 8 10 12 14 16 18 20 22 24
!
05:00 - 08:30
u
Normal
Normal
!
?
Example:
You want to set the same time program
for every day except Monday:
Select the period
"Monday–Sunday"
and set the time program.
Then select "Monday" and set the time
program for this.
Note
If you want to terminate the setting proc-
ess prematurely, keep pressing until
the required display appears.
Deleting a time phase
Set the time for the end point to the same
time that was set for the start point. The
display shows the selected time phase
"
- - : - - ".
Heating
Adopt with
HC1
§
u
0 2 4 6 8 10 12 14 16 18 20 22 24
?
- -:- - - - -:- -
u
Normal
Normal
Mo-Fr
- -:- - - - -:- -
OK
Changing the heating curve
Your system's heating characteristics
are affected by the slope and the level of
the selected
heating curve . Further
information about the heating curve can
be found under "Terminology" on
page 45.
Factory setting:
■ Slope: 1.4
■ Heating curve level: 0
■ Standard room temperature (set
value): 20 ºC
■ Reduced room temperature (set
value): 3 ºC
Extended menu:
1.
2.
"Heating"
3. Select the heating circuit if necessary
(see page 17).
4. "Heating curve"
Central heating
Setting the time program for central heating
(cont.)
5592 682 GB