38
5790 733 - 07
Vitocrossal 300 CA3 Series 2.5 to 6.0 Installation/Service
Liability
Viessmann accepts no liability for loss of profit,
unattained savings, or other direct or indirect
consequential losses resulting from the use of the
Vitocom or the software, nor for losses resulting from
inappropriate use.
The Viessmann General Terms and Conditions apply;
these are listed in the relevant current Viessmann price list.
Viessmann accepts no liability for SMS and e-mail
services provided by network operators.
The terms and conditions of the relevant network
operators therefore apply.
Heating system
H
The Vitocom 100, type LAN1 can be used with
Vitotronic control unit, with or without heating circuits
downstream.
H
The max. number of devices (LON participants)
comprising of cascade control boiler(s) and heating
circuit control units is 30.
Operational reliability
Note:
The Vitocom 100 establishes communication via the
internet between the connected Vitotronic control unit
and the user interfaces, e.g. Vitodata 100 or Vitotrol
app.
Technical details on the control functions and the
messages transferred should be taken from these
installation and service instructions.
The respective range of functions will
only be available if the following conditions
are met:
H
The Vitotronic control units and the Vitocom 100 must
be connected and configured correctly.
H
The Vitocom 100 is connected to the internet via
a DSL router.
H
Internet access must be available at all times.
H
User registration has been carried out (see page 45).
H
In order to send messages via the Vitodata 100, the
recipients must be set up correctly on the Vitodata
server.
Note:
- The heating system and the functionality of the
message paths must be checked at regular
intervals.
- For further improvement of the operational
reliability of the heating system, we recommend
implementing supplementary measures,
e.g. frost protection or monitoring for water damage.
Vitocom 100, LAN 1
Installation
