Viessmann SEIA, Инструкции по установке и обслуживанию для подрядчиков

Страница: 10 / 56

10
Siting information
!
Please note
To prevent material losses, install
the heating water buffer cylinder
in a room free from the risk of frost
and draughts.
Otherwise the heating water buf-
fer cylinder must be drained
when not in use and there is a risk
of frost.
■ Provide adequate clearance from the
wall so that the temperature controller
can be operated (if installed).
■ Placing the heating water buffer cylin-
der on a plinth will make the room eas-
ier to clean.
Installing the Vitocell with an immersion heater
a
a
Immersion heater installation
instructions
Maintain the minimum clearance.
Cylinder capacity Output
Immersion heater Dim. a
750 and 950 l 6 kW
12 kW
min. 500 mm
min. 700 mm
Note
The unheated length of any threaded
immersion heater installed on site must
be at least 100 mm.
Installation information
Product information
(cont.)
5517 155 GB