Viessmann EM-100/173, Техническое описание

Страница: 5 / 36

Switching cabinet
VITOBLOC 200
CHP switching cabinet 5
5780078
GB
1.3 Displays and measurements
The display shows actual values, targets, limits and fault/status messages.
Display of electrical parameters
1. alternator voltage (L1, L2, L3) 5. network frequency
2. mains voltage (L1, L2, L3) 6. actual cogeneration output
2. busbar voltage (L1, L2) 7. battery voltage
3. alternator current (L1, L2, L3) 8. reactive power factor
cos φ
4. alternator frequency
Display of engine parameters
1. oil pressure 4. lambda probe voltage
2. cooling water temperature
5. heating water return temperature into the block-type
thermal power plant (PT 100/2)
3. exhaust gas temperature A 6. total optional heating water return (PT 100/3)
Added potential engine parameters with modules with ANA 16
(EM-199/263, EM-238/363, EM-260/390, EM-401/549, EM-530/660)
7. engine oil temperature (PT 100/4) 10. exhaust gas temperatures B / C / D
8. mixed gas temperature (PT 100/5) 11. load pressure (optional)
9. mixed cooling water temperature (PT 100/6)
Display of fault messages
1. emergency stop 25. synchronising malfunctioning
2. minimum oil level 26. speed < 50 / pick-up defective
3. minimum cooling water pressure 27. maximum oil level
4. minimum gas pressure 28. maximum return temperature PT 100/2
5. safety temperature limiter tripped 29. maximum heating water temperature PT 100/3
6. maximum alternator winding temperature 30. maximum output exceeded
7. maximum sound hood temperature
31. reverse power (delayed to 50% output
– over
50% undelayed)
8. ventilator malfunctioning 32. power regulator malfunctioning
9. cooling water pump malfunctioning 33. lambda regulator malfunctioning
10. maximum exhaust gas counterpressure 34. alternator contact malfunctioning
11. feed switch tripped or turned off 35. ignition malfunctioning
12. external malfunction 36. oil pressure malfunctioning
13. overspeed 37. lambda starting position
14. cooling water temperature 48. knocking malfunction
15. maximum exhaust gas temperature A 54. safety shutdown
16. minimum exhaust gas temperature A 55. engine not stopped (speed > 50 Upm)
17. minimum oil pressure 56. battery low voltage
18. maximum gas pressure 57. alternator low voltage
19. heating water pump malfunctioning 58. alternator excess voltage
20. starting speed < 50 Upm 59. alternator excess current
21. ignition speed 60. alternator load unbalance
22. speed range not reached 61. sealing test / seal test malfunctioning
23. speed < 1,200 Upm 62. line protection malfunctioning
24. enabling malfunctioning 63. sensors malfunctioning