9
Whatever the make of boiler, burner or flue system,
gas-tight flue systems can still create pulsation noise.
A change of resonance may be affected by rotating the
damper fitted into the flue outlet.
C
B
B
A
Fig. 1
1.
Undo M 5 screw
A
on lever
B
of the damper
lock.
2.
Adjust the lever until no further pulsation noise
occurs. The lever indicates the position of rotary
damper
C
.
3.
Tighten M 5 screw
A
on lever
B
of the damper
lock.
4.
Re-adjust the burner if required.
Shutting down the system
1.
Switch OFF the mains isolator or the power supply,
and safeguard against unauthorised reconnection.
2.
Pull plugs
fA
and
lÖ
from the burner.
3.
Close the gas shut-off valve.
Opening the boiler door
Danger
When working with high temperature insulating
materials that contain zirconium or aluminium
silicate ceramic fibres, fibre dust may develop.
This fibre dust can be harmful to health.
Only trained personnel may adjust or replace
the insulation. Wear suitable protective clothing,
especially breathing equipment and safety gog-
gles.
1.
Remove the gas supply pipe.
2.
Loosen 4 screws on the boiler door and open it.
!
Please note
Scratches inside the combustion chamber can
lead to corrosion.
Never place tools or other objects inside the
combustion chamber.
Commissioning, inspection, maintenance
Minimising pulsation noise
5692910
Содержание CR3B
Страница 18: ...18 Commissioning inspection maintenance Operating and service documents cont 5692910 ...
Страница 20: ...20 012 011 008 005 010 014 013 012 016 015 004 003 018 006 007 008 009 021 Fig 8 Parts lists Parts 5692910 ...
Страница 26: ...26 004 003 004 002 002 017 001 Fig 11 Parts lists Miscellaneous 5692910 ...
