1. To clean the Nasal Applicator, wipe gently with 70% alcohol or antiseptic wipes, clean gently
with soap and water, or sanitize with a UV lamp.
2. Use a soft, dry cloth to clean the other surfaces. Do not use abrasive cleaners.
3. Do not submerge any of the components on the headset in liquid or cover with other material
during use.
4. Store in a dry and dust-free location at temperatures between 10
o
C to 40
o
C, away from direct
sunlight.
5. We do not recommend sharing devices and nasal applicators for hygiene safety reasons.
CARE AND CLEANING
Headset modules: 810 nm LED, max output 100 +/- 10% mW/cm2 x 6 units
Nasal applicator: 810 nm LED, max output 25 +/- 10% mW/cm2
Module A: 810 nm LED, max output 75 +/- 10% mW/cm2
Output Module Parameters in GUI:
Power output: 0%, 15% to 100%
Output frequency: 1 Hz to 10,000 Hz
Run time: 0 to 99 minutes
Delay start time: 0 to 99 minutes
Phase: A & B (A is anti-phased/asynchronous to B)
Duty cycle: 0%, 50%, 100%
Frequency sweep: Frequency step size: 1 Hz to 10,000 Hz
Frequency step duration: 1 to 999 seconds
Power sweep: Power step size: 15% to 100%
Power step duration: 1 to 999 sec
Peripherals:
Power adapter: AC Input: 100-240 V, 1 A, 50/60 Hz
DC Output: 5 V, 5 A
Bluetooth: Built-in
Vielight Universal Power Bank Interface: Enables the use of most commercially available
power banks to run the Neuro Pro hardware.
GUI hardware: Smart phone
SPECIFICATIONS
9