Instructions for use Multiplex Trio F
GB
Install the profile seal and
overflow unit.
Screw the fastening flange
with O-ring into the overflow
unit.
Tighten the fastening flange.
Mount the seal onto the drain
casing.
Installation example using
steel bathtub (screw-in valve
22.5 mm).
Installation example using a
plastic bathtub (screw-in valve
30 mm).
Insert screw-in valve with seal
into the drain casing.
Tighten screw-in valve with
assembly aid supplied.
Shorten the overflow pipe as
required.
Mount overflow pipe and
ensure sufficient insertion
depth.
Insert inlet element.
Turn the external ring of the
inlet element onto the screw
heads of the screw-in valve.
Tighten fastening polygon
screw slightly.
Place the cover plate onto the
thread.
Screw the cover plate into the
thread manually.
Mount cover rosette onto the
overflow unit.
Loosen the connecting bend
from the drain and connect
on the water side.
Install the screw connection
piece.
Mount connecting elbow
onto the drain and tighten
union nut by hand.
To close the valve cone:
Turn the rotatable collar
anticlockwise.
To open the valve cone:
Turn the rotatable collar
clockwise.
21
After assembly is complete,
perform a leakage test.
E
Assembly steps
Unscrew the cover plate per
hand.
Lift cover.
Loosen internal polygon
screw and remove inlet
element.
Clean the inlet element under
running water.
Loosen internal polygon
screw on the valve cone.
Close the valve cone and
hold this position with the
rotatable collar. Remove valve
cone.
Replace damaged seals.
Clean drain casings as
required.
To install, follow the same steps in reverse order!
F
Cleaning
The pipe interruptor prevents water
from flowing back into the drinking
water line when the bathtub is
filled.
Installation diagram
Viega connecting set
with concealed pipe
interruptor DN 20 design A2,
DIN 1988-4 and DIN EN 1717
D
Function of pipe interruptor
8
Содержание Multiplex Trio F Series
Страница 2: ...2 Modell 6145 4 B C D E...
Страница 3: ...3 Modell 6145 4 E...
Страница 4: ...4 E F Modell 6145 4 21...