Viega Multiplex Trio F Series, Инструкция по эксплуатации, Страница: 7 / 8

GB
Instructions for use Multiplex Trio F
Multiplex Trio F is a combined inlet, drain and overflow unit for bathtubs with a
52-mm drain hole. It meets the requirements of DIN EN 274.
It is exclusively designed for household wastewater. Introducing other liquids such as
cleaning agents that could damage sanitary equipment, drain components and pipe
materials, especially those with a pH value of less than 4, is not permitted. Installation
must only be performed by specialist companies in compliance with local building code.
Caution: Safeguard drinking water from contamination.
To prevent contamination of drinking water caused by bath water flowing back into
the drinking water system, a pipe interruptor must be installed between the concealed
shut-off fitting and the bathtub drain. Local standards and regulations must be
observed.
This instruction manual should be given to the building owner after assembly.
A
B
Parts

Rotatable rosette

Overflow

Mounting aid

Drainage elbow

Cover rosette

Sleeve

Screw-in valve

Fitting set

Fastening flange

Overflow pipe

Seal

Extension element

O-ring

Cover plate

Profile seal

Casing

Profile seal

Inlet element with
fastening screw

Odour trap
C
Dimensions
Model H
[mm]
L
[mm]
6145.4 180 - 400 100 - 260
6145.5 180 - 430 130 - 370
6145.6 180 - 480 100 - 680
Model Art.-No. Product description
6145.4 672 027
Trio F drain and overflow set,
for water inlet through the drain unit, with rotatable rosette (M1) and
cover plate, with inlet element, with odour trap and 45° drainage elbow,
with concealed pipe interruptor DN 20 (design A2, DIN 1988, Part 4),
DIN EN 1717 safety mechanism DB, with rosette (RU1), for bathtubs with
52-mm drain hole ø, quality monitored per DIN EN 274
with 540 mm long Bowden wire
6145.5 675 462 As above, however with 725 mm long Bowden wire
6145.6 675 479 As above, however with 1070 mm long Bowden wire
7