Clamping strip configuration 20 m cable
Pos.
cable
Functions
Marking on
the connection
strip
5
conductor 3
motor connec‐
tion
motor -
6
conductor 4
motor connec‐
tion
motor +
11
conductor 2
Pressure
switch
Sensor
12
conductor 1
Pressure
switch
Sensor
▶
Insert the battery fuse (right).
INFO!
On delivery, the battery fuse is attached to the inside
of the casing with adhesive tape.
NOTICE!
Depending on the length of the connection cable, a
jumper may be required to make a connection onto the control.
An incorrect jumper position can lead to malfunctions. Back
flow protection is no longer ensured.
▶
When using the cable set (20 m, art.-no. 483 500), place jumpers
onto both contacts (see illustration).
Handling
Grundfix Plus Control backflow trap type 3
21