Loosen fastening ring with screwdriver.
Push the floor piece in by one ring (1 x 10 mm).
The fine tuning within these dimensions takes place using the height
adjustment piece.
The water seal level reduces to 40 mm.
Fit the mounting ring and tighten to a maximum 2.5 Nm
±
0.2 Nm
using a screwdriver.
Alternatively, the screw can be tightened until the markings on the
mounting ring match up.
Chapter 3.2.2 „Mount base unit“ on page 19
.
Installation height 100–109 mm
1x
10 mm
Handling
Advantix shower channel, base unit
16 from 32
