Viega Advantix 4937.2, Инструкция по эксплуатации, Страница: 6 / 14

2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe.
National regulations can be found on the relevant web site of your
country at
viega.com/standards.
Regulations from section: Media
Scope / Notice Regulations applicable in Ger-
many
Typical domestic wastewater DIN 1986-3
2.2 Intended use
2.2.1 Areas of use
The drain is suitable for pushing into HT, PVC or cast-iron pipes and
sleeves with a nominal width of DN 100. It is intended for use in floor
constructions without sealing – e. g. terraces whose slabs are laid
directly onto the soil or cellars in which small amounts of wastewater
occur at irregular intervals.
Technical information, see Ä
Chapter 2.3.2 „Technical data“ on page 7.
2.2.2 Media
The drain is intended for draining of household-type wastewater in con-
stant operation, see
Ä
„Regulations from section: Media“ on page 6.
n
The short-term temperature of the wastewater may reach up to
95° C. The temperature must be considerably lower in constant
operation.
n
The pH value must be higher than 4 but lower than 10.
It is not permitted to introduce wastewater which would damage the
product material.
2.2.3 Drainage capacity
Drainage capacity at an accumulation height of 35 mm above the grate:
0.65 l/s
Product information
Advantix plug-in drain 6 from 14