Viega 8350.33 Скачать руководство пользователя страница 4

Страница: 4 / 42

1 About these instructions for use

Trade mark rights exist for this document; for further information, go to

viega.com/legal.

1.1

Target groups

The information in this instruction manual is directed at the following
groups of people:

Heating and sanitary professionals and trained personnel

Qualified electricians

Operators

Consumers

It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.

The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.

1.2

Labelling of notes

Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.

DANGER!

This symbol warns against possible life-threatening injury.

WARNING!

This symbol warns against possible serious injury.

CAUTION!

This symbol warns against possible injury.

NOTICE!

This symbol warns against possible damage to property.

About these instructions for use

WC flush actuation

4 from 42

Содержание 8350.33











































Результаты поиска

Содержание 8350.33

Отзывы:

Похожие инструкции для 8350.33

Бренды по названию

Популярные бренды

Viega 8350.33, Инструкция по эксплуатации

Результаты поиска

Содержание 8350.33

Отзывы:

Похожие инструкции для 8350.33

Бренды по названию

Популярные бренды