Viega 8315.1, Инструкция по эксплуатации

Страница: 6 / 20

2 Product information
2.1 Intended use
2.1.1 Areas of use
The flush plate is intended for the actuation of flushes on Viega con-
cealed cisterns.
Installation is only possible in the following Viega concealed cisterns:
n
Cistern model 2H
n
Cistern model 2L
Ascertain which model is installed before mounting. The following infor-
mation will help you to determine the model of the cistern installed:
Cistern 2H
The revision shaft of this cistern is found at a height of approx. 1 metre
on the front.
Cistern 2L
The revision shaft of this cistern is either found at a height of approx.
75 cm on the front or on the top.
Suitable cisterns
Product information
Flush plate Visign for Style 10 6 from 20