Viega 8174.1, Инструкция по использованию и техническое описание

Страница: 8 / 10

Proceed as follows:
Remove gas pressure spring by lowering the top and bottom
5 mm Allen screw.
NOTICE! If necessary, place a maximum of five 4 mm spacer
washers (included in scope of delivery) under the piston rod of
the gas pressure spring,
Ä
on page 7 .
Insert new gas pressure spring and attach with Allen screws.
Re-mount all components:
n cover frame
n actuating button / hydraulic actuation
n cover plate
n WC ceramic
3.2.2 Preparing gas pressure spring for disposal
WARNING!
Risk of injury due to high pressure
The gas is the gas pressure is highly pressurised. There is a
risk of injury due to flying metal fragments and oil, if dis-
posal is not carried out properly. Observe following safety
measures implicitly for proper draining.
Before disassembling:
– No person in the extended axis of the device. The piston
rod cannot hit anyone in the case of an error.
– Do not remove the ends.
– Under no circumstances use a lathe.
– Put on eye / face and clothing protection.
In case of doubt, please contact your Viega Service Center.
The gas itself is harmless.
Handling
Viega Gas Pressure Spring 8 from 10