Viega 8040.18, Инструкция по эксплуатации

Страница: 11 / 15

Loosen the four nuts on the element (size 17).
Loosen the four front nuts on the sides of the locating surface.
Align all four points flush with the finished wall surface by
unscrewing and screwing the threaded screws.
Check the alignment with spirit level.
Tighten the rear nuts at all four points (size 17), in the process,
secure the threaded screws with a slotted screwdriver.
Tighten the front nuts at all four points (size 17).
Check to ensure they are flush.
17
17
17
Handling
cover plate 11 from 15