Viega 723 347, Инструкция по эксплуатации

Страница: 33 / 60

GB
33
Instruction for use Multiplex Trio
Assembly of the equipment set

Set the valve cone
using the adjusting
screw and counter using
the union nut.

Remove red protective
foil. Insert valve cone.
Insert rotatable collar
(not all the way).

Turn rotatable collar
to the left as far as it
will go. The valve cone
closes.
d Remove rotatable collar
and push it in as far as
it will go in the position
shown.
e
Turn rotatable collar to
left, valve cone closed.
f
Turn rotatable collar to
right, valve cone open.
F
Setting the rise in the water level

Presentation of
rotatable collar without
water level increasing
function.

The water level increase
is activated by pressing
the rotatable collar.

Presentation of rotatable
collar with water level
increase.
d
The water level
increasing function is
deactivated by pulling ①
or turning ② the
rotatable collar.
G
Assembly
o
Push the sliding ring
and seal ring (on the
depression) on the drain
elbow. Screw the drain
elbow with the union nut
together with the odour
trap.
p
Assembly with Viega
connection set:
Connect the water inlet
to the plug-in adapter.
q
Insert the plug-in
adaptor with mounted
water inlet into the
overflow fitting.
r
Adjust the odour trap
and connect to the
wastewater system.
s
Check the drain fitting
for leaks after assembly.
E
573017_Multiplex_Trio_MT9.indd 33 26.06.2017 08:56:38