Viega 4296.4XL Скачать руководство пользователя страница 4

Pay attention to the warning signs and symbols on the Press Booster:

General hazard symbol
Comply with all instructions marked with this symbol to

avoid injuries or danger to life.

Hazard of crushing your hands, fingers, and other body

parts

Observe the operating instructions
Read the operating and safety instructions carefully prior to

the commissioning procedure.

Wear eye protection
Wear safety glasses with side protection to avoid injury.

1.3

About this translated version

This instruction for use contains important information about the choice

of product or system, assembly and commissioning as well as intended

use and, if required, maintenance measures. The information about the

products, their properties and application technology are based on the

current standards in Europe (e.g. EN) and/or in Germany

(e.g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/

Germany. These should serve as recommendations in the absence of

corresponding national regulations. The relevant national laws, stand‐

ards, regulations, directives and other technical provisions take priority

over the German/European directives specified in this manual: The

information herein is not binding for other countries and regions; as said

above, they should be understood as a recommendation.

1.4

Note on use of abbreviated terms

For reading comfort, the following abbreviated terms are used in these

instructions for use:

Term

Abbreviated form

Viega system press machine,

such as Pressgun 6 Plus

Press machine

Viega Pressgun Press Booster

Press Booster

Warning signs and symbols

About these instructions for use

Pressgun Press Booster PT2

4

Содержание 4296.4XL























Отзывы: