Permitted operating temperature
-10 °C up to 50 °C
Weight without rechargeable bat‐
tery
2500 g
1)
measurement uncertainty 3 dB(A)
2)
measurement uncertainty 1.5 m/s
2
NOTICE!
Wear hearing protection.
The specified oscillation emission value was measured in accordance
with a standardised test procedure and can be used to compare the
machine with another device. The specified oscillation emission value
can also be used for an initial assessment of the intermittent duty.
When the device is actually being used, the oscillation emission value
may differ from specified value, depending on the manner in which the
device is used. Depending on the actual conditions of use (intermittent
duty), it may be necessary to specify safety measures to protect the
user.
2.4.3
Compatible accessories
Only use original accessories (e.g. rechargeable batteries) with the
Viega press tools, as only these were developed and adapted specifi‐
cally for use with the Viega press connector systems. Viega does not
check whether accessories from other manufacturers are suitable for
use with Viega press tools.
Name
Model
Note
Rechargeable bat‐
tery 2.5 Ah / 18 V
Rechargeable bat‐
tery 5 Ah / 18 V
2488.63
In combination with battery
charger model 2488.65
Generation Pressgun 6
Rechargeable bat‐
tery 2 Ah / 18 V
Rechargeable bat‐
tery 4 Ah / 18 V
2488.1
In combination with battery
charger model 2488.3
Generation Pressgun 4B / 5
2.4.4
Operating mode
The Viega Pressgun Picco 6 is an electro-hydraulically operated press
machine. The press machine is switched on by actuating the Start
button once. To initiate a pressing, the Start button must then be
pressed and held down. The hydraulically operated roller head moves
forwards into the press jaw and closes it with a power of 24 kN.
Product information
Pressgun Picco 6 press machine with battery
14
