Vido WD050210450, Инструкция по эксплуатации

Страница: 8 / 16

450W/680W ASPIRATOR BLOWER ENG
TECHNICAL DATA
Note: For power tool specifications refer to the nameplate on your power tool.
OPERATING INSTRUCTIONS
Note: Before using the power tool, read the instruction manual carefully.
1. Intended use
The machine is intended for vacuuming and blowing of materials that are not hazardous to one's health.
The machine is not suitable for vacuuming and blowing of flammable materials, metal chips and sharp
objects, such as screws or nails.
2. Switching on and off
1) To start the power tool, simply press the on/off switch. Release the on/off switch to stop your power
tool.
2) If you wish to use the power tool continuously, press on/off switch then lock on button, release on/off
switch first and lock on button second (See Fig 1) . Your switch is now locked on for continuous use. To
turn off your power tool just press and release the on/off switch. The switch will return to "off" position
automatically.
3. Regulating the air flow (Only for WD050210680)
The power tool air volume can be changed by turning the speed control to a given number setting from
1 to 7(At the time when the switch trigger is fully pulled). Higher air volume is obtained when the speed
control is turned in the direction of MAX (See Fig 2). And lower air volume is obtained when it is turned
in the direction of MIN.
4. Blowing
1) For dust blowing, attach nozzle to blower outlet. Turn it clockwise until it clicks (See Fig 3).
5. Dust suction
1) For dust suction, fit nozzle onto suction inlet and dust bag onto blower outlet. Turn them clockwise
until it clicks (See Fig 4).
Model WD050210450 WD050210680
Voltage 110-120V AC 220-240V AC 110-120V AC 220-240V AC
Frequency 50-60Hz 50-60Hz 50-60Hz 50-60Hz
Power input 450W 450W 680W 680W
No load speed 14000/min 14000/min 6000-16000/min 6000-16000/min
Max. air volume 3000L/min 3.0m
3
/min 3500L/min 3.5m
3
/min
Protection class
Machine weight 1.3Kg 1.3Kg 1.4Kg 1.4Kg
8