Vido WD050210450, Инструкция по эксплуатации

Страница: 6 / 16

450W/680W ASPIRATOR BLOWER ENG
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the power
tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power tool
for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR POWER TOOL
1) Always use protective goggles, a cap and mask when using the blower. Ordinary eye or sun
glasses are not safety glasses.
2) Do not vacuum and blow materials that are hazardous to one’s health, e. g. dust from beech or oak
wood, masonry dust, asbestos. These materials are considered carcinogenic.
3) Do not vacuum and blow liquids. The penetration of liquids increases the risk of an electric shock.
4) Keep the power tool away from rain or moisture. The penetration of water into the motor increases
the risk of an electric shock.
5) When operating the power tool in damp environments is unavoidable, use a residual current device
(RCD). The use of a residual current device (RCD) reduces the risk of an electric shock.
6) Provide for good ventilation at the working place.
7) Never point the nozzle at anyone in the vicinity when using the blower.
8) Always use the dust bag when collecting dust, chips and the like.
9) Do not collect still smoldering cigarette ashes, freshly cut metals shavings, screws, nails and the
like
10) Never block suction inlet and/or blower outlet. Increased motor revolution may cause dangerous
6