Vido WD010810320, Руководство пользователя, Страница: 10 / 16

320W FINISHING SANDER ENG
MAINTENANCE
Warning: Remove the plug from the socket before carrying out any adjustment, servicing
or maintenance.
1. Keep the power tool ventilation slots clean and free from obstructions. If available, blow compressed
air into the vents to clear any internal dust (safety goggles must be worn when undertaking this
process).
2. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.
3. Always store your power tool and accessories in a dry place.
4. If you see some sparks flashing in the ventilation slots, this is normal and will not damage your power
tool.
5. The carbon brushes should be inspected frequently when power tools are used continuously. To
inspecting or replacing the carbon brushes, use a screwdriver to remove the carbon brush caps (See
Fig 5). Take out the carbon brushes. If it becomes worn to or near “wear limit” (See Fig 6), replacing the
new ones, reinstall the holder cap firmly.
Note:
• If your power tool runs sporadically, loses power, makes unusual noises or runs at a reduced speed,
check the carbon brushes. To continue using the power tool in this condition will permanently damage
your power tool.
• Both carbon brushes should be replaced at the same time. Use only identical carbon brushes. Keep
the carbon brushes clean and free to slip in the holders.
6. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
TROUBLESHOOTING
1. If your power tool will not operate, check the power at the mains plug, or check the carbon brushes.
2. If your power tool doesn’t work properly, check that sanding sheet be worn away, replace it with a
new one if worn away.
3. If a fault can’t be rectified, return the power tool to an authorized dealer for repair.
ENVIRONMENT PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.
10