Operation
42
Vidikron PlasmaView VP-6000 VHD Owner’s Operating Manual
PRE
L
IMINAR
Y
• Noise Filter:
To apply noise filtering to the input signal, select Noise Filter from the Input
Color menu. The Noise Filter is useful for clearing up noisy images from 480i video
sources.
Use the left- or right-arrow buttons to select the desired amount of noise reduction,
keeping in mind that higher settings (which reduce high frequencies) may also “soften”
the image.
ISF Day - Display Color:
Refer to
ISF Night - Display Color
.
ISF Day - Input Image:
Refer to
ISF Night - Input Image
.
ISF Day - Input Color:
Refer to
ISF Night - Input Color
.
Save ISF Settings:
Whenever you make a change to the ISF settings, you should always save
it. Select Save ISF Settings from the ISF Calibration menu to do this. In the event you ever
have to perform a System Reset, you can restore the saved ISF settings by selecting Restore
Saved Settings in the Service menu. (System Reset and Restore Saved Settings are described
on page 45.)
Output Shift:
The controls in the Output Shift menu are similar to those in the Input Position
menu, except that they change the characteristics of the output signal. These settings are
saved independently
for each aspect ratio
.
Splash Configure:
Use the Splash Configure menu to customize the appearance of the
start-up message that appears on the vacuum fluorescent display upon power-up.
• Owner Name/ISF Calibrated/ISF Other:
You can have the PlasmaView VHD display the
owner’s name, your name, the phrase “ISF Calibrated” and/or any other string, up to 20
characters in length.
Use the up or down cursor button to select a character. Use the right and left cursor
buttons to change the cursor position. Press
MENU
when you have finished entering text.
Then, check the “Splash Enable” box to have the PlasmaView VHD display the information
you enter here when it is turned on.
• Vidikron/ISF Logo Splash Screen Timers:
When you turn on the PlasmaView VHD, it
projects a welcome screen with the Vidikron logo followed by one with the ISF logo.
Select Splash Timer from the Splash Configure menu to set the amount of time that these
two images appear. The range is from 2 to 60 seconds, in one-second increments.
Use the up or down cursor button to select a timer value to adjust. Use the right or left
cursor button to change the timer value. Press
MENU
when you have finished configuring
both timers.
OSD Position:
Select OSD Position, press
ENTER
and use the arrow buttons to change the
size and position of the OSD controls.
Содержание PlasmaView VP-6000 VHD
