Vidikron PlasmaView VP-6000 VHD, Руководство по эксплуатации для владельца

Страница: 32 / 78

Installation
22 Vidikron PlasmaView VP-6000 VHD Owner’s Operating Manual
PRE
L
IMINAR
Y
Digital Video Connection: The PlasmaView VHD has a DVI input, labeled DIGITAL RGB .
Connect the DVI output from the VHD Controller to this input, using a standard DVI cable.
RGBHV Connection: Connect the RGBHV output from the VHD Controller to the ANALOG
RGB IN input on the PlasmaView VHD. Use a standard, RGBHV breakout cable with five BNCs
at the controller end and a 15-pin, D-sub male connector at the PlasmaView VHD end.
RS-232 Connection: Connect the RS-232 output from the VHD Controller to the RS-232C
input on the PlasmaView VHD. Use a standard, modular telephone cable with RJ11 plugs at
both ends. On the PlasmaView VHD end, use the provided RJ11-to-DB9 adapter. This adapter
is wired as shown in Figure 3-4.
Figure 3-4. RS-232 Connection from the VHD Controller to the PlasmaView VHD
3
4
2, 5
XMT DATA RCV DATA
REQUEST TO SEND
SIG GND
3
2
8
7
5
RCV DATA
XMT DATA
CLEAR TO SEND
NO CONNECTION
1, 6
1, 9
SIG GND
To/From
VHD
Controller
PlasmaView
RJ-11 Male
DB-9 Female
1 5
6 9
RS-232C