Quick Guide for the V-Tap VoIP 1 & 2
v1.12 © 2017-2019 Vidicode 2/4
HARDWARE INSTALLATION
•
By default, the V-Tap VoIP functions as a normal 4-port switch.
•
Connect the local network to any port on the V-Tap.
•
Connect one or more VoIP phones to any other port on the V-Tap.
•
For a PoE powered phone, use the PHONE2 and PHONE3 ports.
•
Connect the USB of the V-Tap to the adapter for power.
SETUP THROUGH THE WEB INTERFACE
There are two ways to access the web interface of the V-Tap VoIP:
1)
Start a browser and enter in the address line
http://vtapXXXX.local
XXXX
are the last 4 digits of the MAC address, found on the bottom.
Note: It may take some time before the local name is known to the network.
For this V-Tap, enter
http://vtap019e.local
2)
Or enter an IP address on the first line of the text file
“IP.TXT”, put this
file onto an SD card and insert the card into the V-Tap.
Then enter this IP address in the address line of the browser.
Login with the user name admin and password admin.
After login, the settings page appears. For a detailed description of the above
possibilities and of all the settings, see the V-Tap VoIP manual.