Quick Guide for the V-Tap ISDN2
V1.0 ©2017 Vidicode 2
HARDWARE INSTALLATION
•
Connect the ISDN phone with the V-Tap to ISDN port 1.
•
Connect the ISDN coming from the wall/PBX to ISDN port 2.
•
Optionally connect the network to port 3 or 4 for web access and/or Tunnel function.
•
Insert an SD card into the V-Tap to store the recordings on.
•
Connect the USB of the V-Tap to the adapter for power supply.
SETUP THROUGH THE WEB INTERFACE
By default, the V-Tap unit has DHCP enabled AND listens to the IP address
192.168.55.66. This IP address can be entered directly in the address bar of your
browser, only when the local network does not have a DHCP server and when
your PC has an IP address that lies in the same IP range as the IP address of the
V-Tap ISDN2. The IP address of your PC must therefore lie in the range
192.168.55.0 till 192.168.55.255. The IP mask should be 255.255.255.0.
Entering the IP address in your browser is showing the login page.
Default IP address:
192.168.55.66 (or from DHCP server)
Default User name:
admin
Default Password:
admin
After login, the settings page appears. For a detailed description of all the
settings, see the V-Tap ISDN2 manual.
