Vidicode 1370 LS120, Руководство пользователя

Страница: 45 / 102

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV
45
6 Operating a Flash Call Recorder
The previous chapter covered the basic functions of the Call Recorder. This
chapter will discuss the additional instructions for a recorder with a flash disk.
The owners of a different type of recorder need not concern themselves with
this chapter.
6.1 Introduction
As with every Call Recorder, the Flash Call Recorder is meant for continuous
automatic recording. Because its memory is small, recordings are overwritten
after a relatively short period of time.
The Flash Call Recorder is meant to solve the problem of only occasionally
wanting to save a highly important recording, such as a threatening phone
call, for instance. For that purpose the memory has been split into a
continuous part that will be overwritten again after some time, and an archive
that stores a recording until it is erased by the user.
At delivery the space in the archive is about 2 hours. The continuous memory
of model 1370 can store about 2 hours, and of model 1371 about 6 hours.
The ratio between the archive and the continuous memory can be changed
by your supplier, if required. (If this is done, the recordings present in the
recorder will be lost.)
6.2 Archiving
If the red Record key is pressed during recording, or later when playing the
recording, it will be stored in the archive. Note that it is still possible to archive
a recording, even after recording has finished. Only after the total capacity of
the continuous part has been reached (2 hours for model 1170 and 6 hours
for model 1171), will archiving be impossible, because the recording will
definitely have been overwritten. To summarize:
•
To archive during recording press the Record key
• To archive after recording find the recording. If it is indicated on the
display, or if it is playing, press the Record key to archive. The
recorder will then ask for confirmation of your request.