Call Recorder PRI manual © 2009-2014 Vidicode®
17
3
Configuration and operation
After you have connected the hardware it is time to configure and use
the Call Recorder. This chapter explains you how the user interface
works. In the following chapters we guide you with the configuration.
You must:
•
Go through the recorder settings and make changes if required
•
Go through the network settings so the Call Recorder will fit in
with your network
•
Edit the Numberlists to enable special functions that you may
want
•
(Optional) Install the Call Recorder Access software on your PC
and test the connection to the recorder
3.1
Operation basics
The Call Recorder ISDN has a common menu driven user interface. Most
functions and operations are initiated by pressing a function key
followed by a sequence of menu keys of which the function is
determined by the text in the display. The use of function keys and
menu keys is as follows:
3.1.1
Function keys
The most frequently used functions of the Call Recorder PRI have been
grouped in the function keys. Throughout the entire manual symbols
representing the function keys are used to indicate the function key
corresponding to the described function.
3.1.2
Menu keys
After pressing a function key the available functions are assigned to the
four menu keys. The operation of the menu keys is determined by the
text in the display right above the corresponding key. Throughout the
entire manual figures representing the display with or without the
menu keys are used to show the required action corresponding to the
described feature.
