Vidia SJ-002, Инструкция по эксплуатации

Страница: 17 / 20

| 17
Please check the details below
Before contacting Technical Support for repair.
It makes noise while operating.
-While processing hard ingredients, it could make a sound.
It is normal when the auger is rotating. Please note that it is not malfunction.
-Please place the appliance on a stable surface.
Extracted juice amount is less than before.
-Check if stem net of the juice stem is blocked. If using withered and chilled ingredients, it may cause
blocking the stem net.
If the materials stuck on the stem net, please clean first and then use again.
Frozen or refrigerated ingredients for long time are extracted into less amount of juice.
It stops during normal operation.
-Have you put heavy loads of ingredient or thick/big ingredient?
Press reverse button for 3~5 seconds and release it. Repeat this process 2~3 times.
*Read the manual Page 11 and follow [REV] button guideline.
If the auger does not work even after the above process, unplug the power cord from the socket,
disassemble the drum set, wash and use it again.
A large amount of juice residue in squeezing screw does not discharge.
-Large amount of soft ingredients such as tomatoes, kiwis, strawberries, etc. can be accumulated
around the auger or feeding chute and cause a difficulty to be discharged.
At this time, place some of fiber ingredients and push them down with pusher for 3~4 times.
Still the problem has not been solved, unplug the power cord from the socket and disassemble the
drum set, wash and use it again.
* Regarding the Disassembly, cleaning and care, please refer to Page 14 or contact the local Customer
Care Center.
Check the details below before contacting Technical Support for repair or service.
When applying for after sales service, check the manufacturer’s serial number or bar code.
4EB010 사용설명서 Oscar DA-1200 (GG Series185x255)_V.00.indd 17 2015-11-18 오전 9:06:19