background image

 

9

VPROX 1000-A 

REMOTE APARTMENT UNIT KEY SYSTEM 

 

DESCRIPTION 

System works with the VproX 1000 Unit through a Serial BUS interface (only 3 wires not shielded, for a max. 
distance of 500 mts and max. resistance of 10 Ohm). 
 
It is possible: 
~ to connect on the same BUS more than 100 VproX 1000-A Units which, during initialisation, must be named 
giving a distinguishing number (in BINARY code)  by means of the 8 way Dip-switch bank present on the 
board ( switches from Nr.1 to Nr.7 ). 
~ to program it as an Apartment door Unit using Nr. from 1 to 99 
~ to program it as an Additional Main door Unit using Nr. from 105 to 120 ( the real Nr. will be Additional 
Main door from 5 to 20 ) 
~ to connect a Reader Module ART.847, 848 or 849 using 5 standard wires, not shielded, for a max. distance of 
200 mts and max. resistance of 10 Ohm 
~ to connect a Back-up Battery to guarantee the right operation in case of Mains failure (230V a.c.); at the end 
the system will provide to charge it 
~ to select the Relay output time from 2 to 5 sec.( by means 8th Dip-switch) 
~ to connect an additional Button to close Relay 1 contact for programmed time 
~ to supply directly d.c. or  a.c. Lock (12V 1.6A max.) 
 
- 9 Module Box facility. 
- Red LED facility to signals a damage on the output stage connected with the BUS (in case of fault it helps to 
find the damaged Unit). 
- Self protection Alarm after 5 attempts with an unstored or not qualified keys: the Reader will be disable the 
1st time for 10 sec. the 2nd 20 sec. and so on. 

 
 

OPERATION 

 
In stand-by operation, the system is ready to accept a key; when a user inserts a key in a Reader, the system, by 
the Serial BUS, asks to the VPROX 1000 if the key is stored and qualified; if yes, the Reader will be green, a 
sharp "beep" will give out and a Relay will be on for programmed time, if not, the Reader will be red and a low 
"beep" will give out. 

 
 
 
 
 
 

Technical specification 

 

Working 

voltage 

      : 

230V 

a.c. 

+/- 

10% 

Stand-by 

absorption 

      : 

approx. 

3VA 

Operation absorption with Electric Lock ON  

 

 

: max. 20VA 

Working 

temperature 

      : 

-10 

+50 

degrees

Содержание VproX 1000-M












Отзывы: