Videx DIGITAL GSM DOOR INTERCOM SYSTEM, Техническое руководство

Страница: 4 / 36

PAGE 4 of 36 VR GSM DOOR INTERCOM TECHNICAL MANUAL VER2.0.0
MANUAL INTRODUCTION
The information in this manual is intended as an installation and commissioning guide for
the Vandal resistant GSM door intercom systems using the Art.150 self contained GSM
audio module. This manual should be read carefully before the installation commences.
Any damage caused to the equipment due to faulty installations where the information in
this manual has not been followed is not the responsibility of Videx Security Ltd.
VIDEX run free training courses for engineers who have not installed this system before. Technical
help is also available on 0191 224 3174 during office hours or via e-mail tech@videx-security.com.
SYSTEM INTRODUCTION
The system is designed to work on the same technology as mobile phones. It enables a
call to be made from an entry point (Door, gate etc), to any telephone number (mobile or
land line). Up to ten call buttons can be connected to the door panel, each able to call two
telephone numbers (If the first is busy or not answered, the call can be diverted to the
second). The Art.150 is the GSM module which can be fitted to vandal resistant panel.
Features of the module include a dry contact relay output, an open collector auxiliary
output, push to exit input and switched 0V auxiliary input. Additionally, a SPEAK, BUSY
and DOOR OPEN LED are available on the front of the module (DDA facility) to guide the
caller through the call, speak and door open stages of the call. Programming of the
telephone numbers and additional features can be carried out via text messaging or dial in.
An additional access control feature is also available on the system allowing a number of
callers to open the gate/door simply by dialling the telephone number of the intercom panel
(The intercom panel will not answer these calls but will activate the relay output).
A SIM card is required for this product but not supplied. It is recommended to choose the
SIM card which has the best coverage for the area in which the intercom panel will be
installed. Both contract and ‘Pay as you go’ SIM cards can be used but if using a ‘Pay as
you go’ we would recommend setting up an automatic top up to avoid running short on
credit and loosing the use of the intercom panel. Alternatively if you already have a
contract mobile phone it should be possible to get a second SIM card and telephone
number on the existing account. For more information contact the SIM card providers or
visit their web sites. The SIM card holder is located under the cover of the amplifier. See
Testing, power up and reset for more information.
When registering a new SIM you may be asked for the IMEI number. This is the unique
serial number of the GSM intercom and can be found on the rear of the module as shown
in the picture below:-
IMEI Number