66550032-EN - V6.2 - 31/10/20
- 26 -
ESVK/6286 Series “2 wire Bus” videokit
ESVK/6286 Series - Installation handbook
CONNECTION TERMINALS SIGNALS
BUS1
Bus input
BUS2
Bus input
GND
Ground
+12VM
+12Vdc power supply input (Art.
323/12 or
Art.
AMR2-12) for version with Memory Board op-
tion or auxiliary power supply input (to be used
when two or more slave monitors are ringing to-
gether with the switch
4
of
SW3
is set to ON)
GND
Ground
+VAUX
+30Vdc power supply input (Art.
2321) to be
used when two or more slave monitors are ring-
ing together with the switch 4 of
SW3
set to ON
C
Dry contact. Internally linked to
NO
when the
button is pressed.
Max 35Vdc,
50mA
NO
Dry contact. Internally linked to
C
when the
button is pressed.
–
DOL
Auxiliary LED power supply input (ground)
+DOL
Auxiliary LED power supply input (+12Vdc)
AL-LB_GND
Ground output for use in combination with
AL
&
LB
active low inputs
LB
Local bell input (active low)
AL
Alarm input (not implemented yet)
SPECIFICATION
Housing/Mounting:
6200 Series Videophones / surface
mount
Push buttons:
Yes, 4
Programming:
Yes, carried out by the buttons and
the dip-switches located on the rear
of the videophone
Controls:
Call tone volume, brightness, contrast
and hue
Power Supply:
Supplied by the BUS line
Power consumption:
Stand-by: 0.2mA
Operating: 200mA
Working Temperature:
-10 +50 °C
MEMORY BOARD
This device is also available in the version with
memory board (Art.
6286/VM).
If you have that version, please refer to the
“6200, 6300, 6400 and 6700 Series Memory
Board”
user manual (in English and Italian) for
installation and use.
The manual is available for download: click/tap or scan the
QR code.
Art.
6286
3.5" colour display videophone