66250203-EN - V0.3 - 10/07/15
8
4000 Series Vandal Resistant Range
Art. 4212V-4212RV - Installation instructions
FLOOR
The floor field displays the floor number of the user called. It is available only in
NORMAL MODE
and can be any value from “1” to “250”.
Modify routine
• select user searching by name or flat
• press
“4”
to enter into edit mode;
• type floor number;
• press to save or to delete characters or exit edit mode without save.
ENABLE
It specifies whether User is enabled or not. If a visitor tries to call a disabled user typing the flat number, display will show
“NOT
FOUND”
otherwise the intercom for that flat will be called. Intercom specified by Phone Id and Block Id.
Modify routine
• select user searching by name or flat;
• press
“5”
to enter into edit mode;
• press
“5”
to enable or disable;
• press to save or to exit edit mode without save.
PHONE ID
The phone ID represents the address of the intercom to call (Set by the 8 way dip switches in the intercom).
Modify routine
• select user searching by name or flat;
• press
“6”
to enter into edit mode;
• type Phone Id number;
• press to save or to delete characters or exit edit mode without save.
BLOCK ID
Block Id field specifies the address of Art. 2206N. It can assume values from “1” to “15”. This field is visible only if the panel is set to
MAIN MODE
(see
“Panel mode” on pag. 13
).
Modify routine
• select user searching by name or flat;
• press
“7”
to enter into edit mode;
• type Block Id number;
• press to save or to delete characters or exit edit mode without save.
TAG
The tags (key or fob) allow users to open the door. Three fob code lengths are supported (2, 3 & 4 bytes). It is specified by Tag width
parameter (see
“Fob width” on pag. 15
).
User can be linked to more than one access code. The modify routine is described in
“Key managing” on pag. 6
Art. 4212V - 4212RV
Audio/video digital front panel
Programming
