manualshive.com logo in svg

Videx 380N/UK, Инструкция по установке и программированию, Страница: 3 / 28

Поделиться
Скачать
Videx 380N/UK Скачать руководство пользователя страница 3

66250010-EN - V2.0 - 24/09/18 

- 3 -

Telephone Interface Module

Art. 380N/UK Telephone Interface Module - Installation Instructions

Contents

Introduction .......................................................................................................................................................................................3
Technical Information .......................................................................................................................................................................4
Connections to a Telephone Line .....................................................................................................................................................6
Connections to Telephones & Other Devices ..................................................................................................................................7
General Directions for Installation ...................................................................................................................................................9
Programming the Art.380N/UK ..................................................................................................................................................... 12
User Commands .............................................................................................................................................................................. 18
Wiring Diagrams ............................................................................................................................................................................. 19
Troubleshooting ............................................................................................................................................................................. 23
General Information ....................................................................................................................................................................... 25
Notes ................................................................................................................................................................................................ 26

Introduction

MANUAL INTRODUCTION

The information in this manual is intended as an installation and programming guide for the 

Art.380N/UK

 telephone interface 

module. This manual should be read carefully before the installation commences. Any damage caused to the equipment due 

to faulty installation where the information in this manual has not been followed is not the responsibility of Videx Security Ltd.
It is recommended that the 

Art.380N/UK

 telephone interface and any other Videx equipment is installed by a competent 

electrician, security or communications engineer.
For UK customers Videx run free training courses for engineers who are unfamiliar or who have not installed this product before. 

Technical help is also available on tel: 0191 224 3174 during office hours (8:30am - 5:00pm MON to FRI) or via e-mail: 

tech@

videxuk.com.

A copy of this Technical Manual can also be downloaded from the Videx websites: 

www.videxuk.com, www.videx.it.

Содержание 380N/UK





























Отзывы:

Нет отзывов