Videx 280N1 Скачать руководство пользователя страница 4

VIDEX ART.280N1 USER INSTRUCTIONS 

  

25/06/2002                      PAGE 4 of  8                    VERSION 1.6 

  

280InstN2. 

Pick up the telephone and press 

RECALL 

 RECALL 

 5 

 + 

 3

  (A confirmation 

tone will be heard from the earpiece).

 

Mode 3 is now set. 

 

MODE 2

  

(For telephones with flash button facility [Pulse or tone]. 

The functions are the same as mode 3, except the door panel can not be switched on 
without a call. 

 

Pick up the telephone and press 

RECALL 

 RECALL 

 5 

 + 

 2

  (A confirmation 

tone will be heard from the earpiece).

 

Mode 2 is now set. 
 

MODE 1 

 

(For telephones with dial disk [Pulse mode only]. 

As above except the flash button is replaced with a double strike on the hook switch. 

 

Pick up the telephone and press 

RECALL 

 RECALL 

 5 

 + 

 1

  (A confirmation 

tone will be heard from the earpiece).

 

Mode 1 is now set. 
 

Operating instructions

 (Mode 4 example)

 

 

To make an outside call

 simply pick up the handset and dial the number (No prefix 

required). 
 

To receive an outside call

 (The phone will ring normally). Pick up the handset, you 

will be connected with the caller. 

 
To receive a call from the door panel

 (A quick double ring will be heard from the 

phone). Pick up the handset, you will be connected to the door panel. 
If you then wish to open the door, simply press the number ‘0’ or ‘9’ key, (You will 
hear short bleeps from the ear piece). 
 

To talk to the door without first being called

 simply pick up the handset and press the 

‘*’ key followed by the ‘7’ key. you can now talk to the door panel. If you then wish 
to open the door press the ‘0’ or ‘9’ key. (When using this feature through a PBX the 
correct line must be selected first). 
 

If an outside call is received while you are talking to the door panel

 (Acoustic signal 

will be heard from the ear piece) it is possible to put the door panel on hold while you 
take the outside call. To do that simply press the ‘*’ key. After the call, to switch 
back, simply press the ‘*’ key again or hang up. If after hanging up, there is still a call 
on the system. The telephone will ring again. 
   

If a call is received from the door panel while you are talking on an outside call

 

(Acoustic signal from the ear piece) It is possible to put the outside call on hold while 

Содержание 280N1










Отзывы: