VIDEX ART.280N1 USER INSTRUCTIONS
25/06/2002 PAGE 2 of 8 VERSION 1.6
280InstN2.
Wiring
The wiring diagram is attached to this document and must be adhered to.
Also see a number of example installations types in the back of this manual.
Terminals
The terminals on the Art280 each have the following functions :-
Terminals L1 & L2 :-
Telephone line input (Not used if the line cord is used).
Terminals T1 & T2 :-
Connects to terminals 2 & 5 on the primary socket supplied by
Videx.
Terminals 230V & 0 :-
Connects to a 230V AC Mains supply.
Terminal 2 :-
Receive speech from door panel.
Terminal 1 :-
Transmit speech to the door panel.
Terminal 3 :-
Ground.
Terminal 6 :-
Call trigger.
Terminals C & NO :-
Dry contact lock output.
Terminal A :-
Aux. Output. Triggered automatically during a call.
Terminal A1 :-
Aux. Output. Triggered by the user for a 1 second pulse.
Te12 :-
12 Volts DC output.
Initialisation
NOTE : If no telephone line is required then jumper P must be fitted. The
telephone line cord is now redundant and should not be used.
NOTE 2 : After each programming function the handset must be replaced.
The system is programmed from the telephone keypad. The telephone must have a
[RECALL] button.
Mode 1, 2, 3 or 4 must be selected to indicate which type of telephone is to be used.
Mode 4 is the most commonly used in the UK. Follow the instructions below for
setting the correct mode :-
Please note that if the Art280 is connected to a system which also uses the same DTMF numbers for
other functions, mode 3 should be selected (This will disable the *7 facility to open the speech
without a call).
NOTE 3 : Before using this system the programming must be carried out as
follows :-
MODE 4
(Most common mode for the UK).
For use with telephones incorporating ‘*’ Button and a RECALL button (Tone dial
mode only)
Pick up the telephone and press
RECALL
+
RECALL
+
5
+
4
(A confirmation
tone will be heard from the earpiece).
Mode 4 is now set.
To program the number of rings from a door station :
(From 1 – 9 double rings)
Pick up the handset and press
1 + n
[i.e. If n = 5, the phone
Содержание 280N1
Страница 9: ......
