For more information, visit us at videotron.com/terminal-support
11
AUTOMATIC SEARCH PROGRAMMING
If the Quick Programming procedure did not work, follow the instructions below. This remote
control programming method allows you to control your TV and your audio system.
NOTE
: When you program the remote control to an audio system, it will only allow you to
adjust the volume on the audio system, not the volume on the TV.
1. Turn on your TV and/or your sound system. First program your TV and then your sound
system.
2. Press the
and
buttons simultaneously until the red light under the
button flashes
twice, then release both buttons.
3. Press
9
-
9
-
1
on the remote control. The red light will flash twice.
4. Then press
1
to search for a TV code, or press
3
to search for a sound system code.
5. Point the remote control at the TV or the sound system. Repeatedly press and release the
CH+
button until the device turns itself off.
6. When the device is off, press the
button to confirm the programming. The red light will
flash twice. If the programming did not work, repeat steps 2 to 5.
7. Repeat steps 2 to 5 to program your audio system.
RESETTING YOUR REMOTE CONTROL
If you would like to program your remote control to work with other devices, or if you are
having problems getting it to work, you can reset it by following these steps:
1. Press the
and
buttons simultaneously until the red light under
blinks twice,
then release both buttons.
2. Press
9-7-7
on your remote control. The red light will blink four times to confirm that
the remote control has been reset.
NOTE
: If neither of the two suggested programming methods worked, refer to the
programming method by code in the complete version of the guide available on the Web.
