Videotec RDDR433, Руководство по эксплуатации

Страница: 21 / 25

Pag. 7 RDDR/RDDT9823/2
Mounting the transmitter and receiver
1. Locate suitable positions for the transmitter and receiver, bearing the prerequisites mentioned in the previous
section in mind. Mark the positions.
2. The ideal installation orientation for the transmitter and receiver is “horizontal” (with the cable at the bottom: see the
illustration “Basic version” on page 5.).
3. Make 4 roles on the wall as shown in Fig. A.
4. Screw the rear of the housing as shown in Fig. B.
5. Screw the covering of the housing as shown in Fig. C.
6. Wherever possible, lay the connection cable through the masonry if the transmitter or receiver is mounted on a wall.
In all cases, take care that the cable is suitably protected by, for example, a cable duct.