Videotec RDDR433, Руководство по эксплуатации

Страница: 16 / 25

Pag. 2 RDDR/RDDT9823/2
INTRODUCTION
Packing contents
•
1 transmitter or receiver
•
1 antenna
•
1 instruction manual
After the delivery, check that the packing is not damaged and shows no evident signs of falls or abrasion. Should this
be so, contact immediately the supplier.
Check that the contents correspond to the above-mentioned list of materials.
Contents of this Manual
This manual describes the data wireless system RDDR433/RDDT433 together with its specific procedures of
installation, configuration and use.
Read this manual carefully, in particular the chapter concerning the safety rules,
before installing and using the wireless system.
Typographic conventions
Different graphic symbols are used in this manual, the meaning of which is here described:
Hazard of electric shock; disconnect the power supply before proceeding, if not otherwise specified.
The operation is very important for the correct working of the system: read carefully the procedure indicated,
and carry it out according to the required modalities.
Description of system features: read carefully to understand the following phases.
IDENTIFICATION DATA
On the data wireless system RDDR433/RDDT433 there are two plates complying with EC specifications.
The first plate includes:
•
Model identification code (Extended bar code 3/9 )
•
Mains voltage (Volt)
•
Frequency (Hertz)
•
Power consumption (Watt)
The second plate shows the model serial number (Extended bar code 3/9)
When installing the appliance, check that the power supply specifications of the
data wireless system correspond to
those required. The use of improper appliances may seriously compromise the safety of the personnel and the
installation.
SAFETY RULES
The data wireless system RDDR433/RDDT433 complies with the normative laws in force at the time of
editing of this manual, concerning electric safety, electromagnetic compatibility and general requirements.
Anyway, in order to ensure the users (installer technician and operator), the following warnings are specified for
safety’s sake:
•
Connect to a feeder corresponding to the specifications indicated on the data plate (see next chapter Identification
data )
•
The outlet must be correctly earthed according to the normative laws in force
•
Before any shifting or technical operations on the appliance, unplug it from the mains
•
Do not use voltage cables showing wear or ageing, since they may seriously compromise the users’ safety
•
The appliance (and the complete system, which it belongs to) must be installed only by qualified technical staff
•
The appliance must be opened only by qualified technical staff. The tampering of the appliance may void the
guarantee terms.