Instruc
tion manual - English - EN
13
MNVCNXM36_2051_EN
7 Switching on
Ensure the unit and the other components
of the system are appropriately closed to
prevent contact with live parts.
Make sure that all parts are fastened down
firmly and safely.
The unit is switched on by connecting the power
supply.
To switch off the unit disconnect the power.
8 Accessories and Supports
The complete list of accessories and
supports is available on the technical data
sheets of the product on the website:
www.videotec.com.
For further details on configuration and
use, refer to the manual of the relevant
accessory or support.
9 Maintenance
Before doing any technical work on the
device, disconnect the power supply.
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
The manufacturer declines all liability for
damage to any of the apparatus mentioned
in this handbook, when resulting from
tampering, use of non-original spare parts,
installation, maintenance and repairs
performed by non-authorised, non-skilled
personnel.
For damage to any parts, repair or
replacement must be done by, or under
supervision of VIDEOTEC.
Whenever replacing the parts as indicated,
always use VIDEOTEC original spare parts
and meticulously follow the maintenance
instructions supplied with every spare parts
kit.
For all maintenance interventions, we
recommend you return the product to the
laboratory that will perform all required
operations.
