background image

VP220D Installation Guide

    |    

4

430751-081 (Rev. 8/21) Copyright 2021 VideoProtects Incorporated. All rights reserved.

Quick Installation Guide

1)

 The camera must be installed in the middle of the front windshield, generally in the  

rearview mirror area above the centerline of the front windshield. For optimal accuracy  

of the forward-facing camera placement must be within 5cm of the center line.

2)

 The external camera lens must be located within the working range of the left or right  

windshield wipers. 

3)

 The optimum vertical height of the external camera lens to the ground is between  

130 cm-240 cm. Be sure that the camera placement does not interfere with the  

driver’s view from the rearview mirror.

 

The ideal installation area is shown in the figure below:

1)

  Clean the interior and exterior of the glass in the  

target installation area with an alcohol wipe to  

ensure that no dirt on the glass in this area will affect 

the adhesion of the mounting bracket and view of  

the external camera lens. Ensure the glass is dry 

before mounting.

2) 

Align the mounting bracket with the connection 

of the bracket facing down (with the toothed side 

facing left).

3)

 Tear off the 3M adhesive film on the bracket and stick 

the bracket horizontally level on the front windshield. 

Then press the bracket in place for 10 seconds to  

ensure there are no bubbles between the bracket 

and the glass.

Step 1

 – 

Specify the position to install the camera

Vehicle Centerline

Step 2 –

 Install the camera bracket

Содержание VP220D











Отзывы: