Videon Shavano, Руководство по эксплуатации продукта

Страница: 5 / 19

1. Setting up your Videon device(s) Page 5
1. Setting up your Videon device(s)
1.1 Network Requirements
Your installation space must be equipped with a DHCP-enabled and multicast-enabled
Ethernet router. Dynamic Host Configuration Protocol (DHCP) refers to a method of assigning
unique IP addresses to devices on a network. Most routers have these capabilities and default
to these settings.
Upload bandwidth needs to be sufficient for the video bitrate that you’re encoding. See the
Suggested Bitrate Table in Section 2.5. (Use a network speed diagnostic tool such as
speedtest.net to determine your maximum upload bandwidth.)
1.2 Equipment
In order to set up a Videon encoder, you need:
•
HDMI or SDI video source
•
Computer with Google Chrome web browser (Chrome version 39 or newer is
recommended)
•
DHCP- and multicast-enabled router connected to network
•
HDMI or SDI cable to connect video source to encoder
•
Ethernet cable to connect encoder to router
•
Ethernet cable to connect control computer to router
With your device, you received a Videon power supply and a USB stick. On the USB stick,
you’ll find the Videon Discovery Application.