videomed Truelink 4, Инструкция по эксплуатации

Страница: 53 / 88

User Interface
80028008_030_B – 773625 – 2021-04-29
53
6.4.1 Image data post-processing
By using locally stored data it is possible to:
– create video sequences from screenshots saved during the
operation (MATS - Movie Around The Snap),
– create still images generated from previously recorded video,
– create annotations on video clips or text information on
images,
– add annotations to videos and images captured.
6.4.2 Selecting the signals to be recorded
Drag the source of which you wish to record a video or capture
snapshots in the Recording Channel box where you will get a Live
Preview of the signal and the basic and advanced recording
functions will be enabled.
The following icons are present in the Recording Channel window:
Channel selection and recording will in no way affect the signals
sent to the monitors via Video Routing.
Icon Function
Enables to start/stop recording of the displayed signal.
If the icon is gray, it indicates that the function is not
active. To activate the function it is required to select a
patient from the list (refer to paragraph “Selecting a
patient present in the list”).
Enables to create snapshots of the video source stream.
Enables to start/stop video signal streaming.
Enables to start recording:
– 1 minutes before,
– 5 minutes before,
– the moment the signal was selected (up to a
maximum of two hours).