Doc # INS-45MX-Series
Issue Date: 9/28/2011
Revision: E
Page 12 of 26
8.2.
Video Function (PC Mode Only) 10”, 15”, 20”
Press
SOURCE
to select a image input:
Press the MENU button to bring up the
OSD Menu.
Press
again to select IMAGE, then press
ITEM twice to enter submenu.
As shown, press
keys to adjust selection.
Note: In remote control, press
key to adjust.
(After adjustment, the monitor will store new settings)
Auto
Auto detect screen detail data, such as clock and phase.
Contrast
Permits adjustment for contrast between light and dark areas
of the picture.
Brightness
Adjusts the overall picture shade and brightness.
Tip: Use the Brightness to make details in the dark areas of the picture to be just visible, and Contrast to
brighten the picture without causing video noise and foreheads to turn white.
H-Position
Allows adjustment for the horizontal position.
V-Position
Allows adjustment for the vertical position.
Clock
Is used to adjust to the best picture quality. It adjusts the number of the clock pixels across one timeline.
Therefore it can affect the picture’s position and size.
Note: Improper adjustment will caused image failure.
Phase
Is used to adjust to the best picture quality. It adjusts the sampling phase across one pixel at a time.
When the phase is not adjusted properly, the picture will be unclear. Therefore this value should be
carefully adjusted.
Note: Improper adjustment will caused image failure.
Recall
Sets the monitor to the original factory setting.
Menu
Sub-Menu
Image
Contrast
Brightness
H-Position
V-Position
Clock
Auto
Phase
Recall
