videogeniX uSwitch, Инструкция по установке и эксплуатации

Страница: 26 / 43

uSwitch and uSwitchPro Installation and Operating Manual Page 26
GPIO Configuration Page (uSwitchPro only)
The GPIO Configuration allows a user to customize how each GPIO is displayed, controlled and its control features.
User Assigned Names
These two configurable fields represent user assigned names for each GPIO relay. Once modified all text identifying
GPIO1 and GPIO2 from the browser interface will be displayed with customer assigned names.
GPIO High State Text
This field specifies the text assigned to the GPIO when it is in the high state.
GPIO Low State Text
This field specifies the text assigned to the GPIO when it is in the low state.
User Assigned Colors
This field indicates the text displayed on the Control Center when the GPIO is in either high state or low state. The
choices from the selection box are “ON/OFF”, “OPEN/CLOSED”, “LOCK/UNLOCK”,”START/STOP”.
Enable Counting
When checked the internal logging software keeps a running count of full transitions on the associated GPIO and displays
it in the “running count” field on the Control Center (home) page. Each time the GPIO goes through a full transition the
counter increments. To reset a counter to zero click on the “Clear Counter” button on the Control Center page.