Videofied XV, Руководство по установке

Страница: 8 / 21

EN.V1 Installation manual XV
8
** For GPRS transmission, the panel will
send alarms and videos to IP 1 (or DOMAIN NAME1) / PORT1
or for backup transmission to IP 2 (or DOMAIN NAME 2)
/ PORT 2 **

YES
CODE/STATE modification
These are the default transmitted events:
Intrusions
Panic
Periodic Test
Tamper
Supervision Fault
Device Battery Low
Panel Battery Low
If you would like any other events to be transmitted press
YES and use the or to toggle between
events.
If you would like the default press ESC/NO
CODE/STATE
MODIFICATION ?
TRANS. STATE
MODIFICATION
List of all
events

YES
ESC/NO
TRANS. STATE
MODIFICATION
ESC/NO
ESC/NO
Your IP1 address is given to you by your monitoring
Station
.
Press YES to enter into the parameter and use the
Keypad to complete the address. Press YES to confirm
your entry and the arrow to move to the next parameter.
*You will use either a IP address or a Domain Name but not
Both*
The Port is given to you by your Central Station .
By default the panel will use 888. If you need to modify the
port press the YES key to enter into the parameter and
the keypad to complete the port. Press YES to confirm
and the arrow to move to the next parameter.
Your Domain Name is given to you by your Central
Station.
Press YES to enter into the parameter and use the
Keypad to complete the name.
Press YES to confirm your entry and the arrow to
move to the next parameter.
*You will use either a IP address or a Domain Name but not
Both. Leave it blank if an IP has already been entered.*
Press to configure IP2 (or DOMAIN NAME 2) and PORT
2 for the back-up server, and IP TMT (or DOMAIN TMT) and
PORT TMT to configure remote maintenance server.
IP1 ADRESS
IP1 ADRESS:
xxx.xxx.xxx.xxx
DOMAIN NAME 1
DOMAIN NAME 1:
xxxxx.xxx.xxx
PORT 1
PORT 1:
xxx

YES

YES



YES
SERVER
ADDRESSES?

YES
ESC/NO
SERVER
ADDRESSES?
ESC/NO