13
INSTALLATION MANUAL
3.
XTO-IP
PANEL PROGRAMMING
XTO-IP
Alarm panel
Your choice will depend on how you are arming the
system :
Standalone
:
Will make the XTO-iP a completely
independant system controlled by arming
and disarming using Videofied peripheral
devices(keyfobs, keypads, badge,readers).
From the host
:
Will make the XTO-iP panel a
piggyback/xtender system that will only arm and
disarm off the latching of 9-12V on the arming
inputs 1 & 2.
COMPATIBILITY
EN 50131 NORMS ?
AREAS CONFIGURATION
AREA 1 NAME :
ESC
NO
OK
or
YES
OK
or
YES
OK
or
YES
ARMING PROFILE :
STANDALONE
ARMING PROFILE :
FROM THE HOST
EXIT DELAY :
45 sec
For the selection
OK
or
YES
ENTRY DELAY :
15 sec
For the selection
Please go to page 15 if you chose
STANDALONE
OK
or
YES
Please go to page 14 if you chose
FROM THE HOST
For full compatibility with EN50131, press
OK
or
YES
.
Otherwise, press
ESC NO.
Press
ESC NO
to default the area names.
Enter the name of the area 1 and
OK
or
YES
.
Repeat the procedure for areas 2,3 and 4.
For further details, please refer to chapter 4.3.
Other values are available: 2 min, 1 min, 45 sec.
Other values are available: 2 minutes, 1 minutes, 45
seconds,30 seconds or 15 seconds.
