![Videofied XT-iP 210 Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/videofied/xt-ip-210/xt-ip-210_install-manual_1015380006.webp)
1.4 Powering and initialization
• Connect the mains power supply and insert the 4 alkaline backup batteries.
• Press and hold the PROGRAMMING BUTTON for 10 seconds, until the indicator LED blinks twice.
• The panel is now reset, a CMA, XMA or XMB has to be enrolled to configure the panel.
Alkaline batteries
Programming button
Mains Power Supply
Ethernet Connector
• Press briefly the XT-iP programming button and release for the enrollment of a
programming keypad. The indicator LED will blink once.
• Insert all 3
LS14500 Lithium batteries
into the keypad.
• Do not mount the keypad. It will displays one of the following screens:
1.5 Pairing the remote keypad
RSI (c) 2013
videofied.com
<=========XX=========>
or
• Press on both
CLR
and
ESC NO
keys at the same time
and release. The indicator
LED on the keypad will blink rapidly. Wait for the keypad to pair.
• If the keypad doesn’t pair up with the panel
and shows «XX», it certainly means
that it is still paired to another system and needs to be reset. Take the batteries out,
and press repeatedly on the keypad tamper switch for 30 sec to 1 minute. Then
proceed to the above steps.
Providing that
Ethernet connectivity is not used
, the XT-iP panel can be powered by 4
LSH20 Lithium, instead of mains power supply with alkaline backup batteries.
www.videofied.com
I N S T A L L M A N U A L
6
1. XT-iP Panel setup