www.videofied.com
I N S T A L L M A N U A L
13
Your choice will depend on how you are arming
the system :
Standalone
: Will make the XT-iP a completely
independant system controlled by arming
and disarming using Videofied peripheral
devices(keyfobs, keypads, badge,readers).
From the host
: Will make the XT-iP panel a
piggyback/xtender system that will only arm and
disarm off the latching of 9-12V on the arming
inputs 1 & 2.
COMPATIBILITY
EN 50131 NORMS ?
AREAS CONFIGURATION
AREA 1 NAME :
ESC
NO
OK
or
YES
OK
or
YES
OK
or
YES
ARMING PROFILE :
STANDALONE
ARMING PROFILE :
FROM THE HOST
EXIT DELAY :
45 sec
For the selection
OK
or
YES
ENTRY DELAY :
15 sec
For the selection
Please go to page 15 if you chose
STANDALONE
OK
or
YES
Please go to page 14 if you chose
FROM THE HOST
3. XT-iP Panel Programming
For full compatibility with EN50131, press
OK or YES
.
Otherwise, press
ESC NO.
Press
ESC NO
to default the area names.
E
nter the name of the area 1 and
OK or YES
.
Repeat the procedure for areas 2,3 and 4.
For further details, please refer to chapter 4.3.
Other values are available: 2 min, 1 min, 45 sec.
Other values are available: 2 minutes, 1 minutes,
45 seconds,30 seconds or 15 seconds.
