00
Videofied Security System Installation Manual
9
5. How to ...
5.3 Register again a CMA keypad on an XL panel
without opening the cover
Activate the touch-sensitive keypad by placing your hand over it.
Enter in special mode by pressing for 3 seconds on the
and the numerical keypad starts to flash.
Type the code 000000 then
to switch the XL panel
in keypad registration mode. On the keypad:
- Insert the 3 Lithium LS14500 batteries.
- Simultaneously press [CLR] and [ESC NO] on the keypad
untiil the indiicator light on the panel flashes and then release.
It is possible to activate or disactivate the flashing green battery
symbol.
Bear in mind that when this symbol is activated, the product has
less battery life and the batteries will have to be changed within
4 years.
Enter in special mode by pressing for 3 seconds on the
and the numerical keypad starts to flash.
Type the code 000100 then
the digital keypad will
remain illuminated while the green battery symbol starts to flash
with the number 0 or 1 on the 7-segment digit.
The number shown is an indication of the display configuration
for the battery symbol (0 for disactivated, 1 for activated).
5.4 Activate or disactivate the flashing green
battery symbol
5.5 Open the cover of an installed XL panel
Unscrew the screw on the left-hand side of the panel and
separate the panel of the base.
KEYPAD 1
RECORDED
INSTALLATION CODE
Enter the installer code +
Display of the keypad
Actions
5.6 IP TMT Configuration
You need a computer connected to the network IP, configured
either on a fixed address IP with the opened port 888 is needed,
or on a name of domain with the opened port 888.
About the programming of the panel, it is necessary either to
inform on the IP TMT your fixed IP, or on DOMAIN NAME your
domain name.
The computer connected on your network has to have the
software Fontel TMT installed and parametrized.
The connection by seizing 999999 + [OK] on the panel XL,
either on the keypad CMA (if it is on the site).
In Frontel TMT make: File / open, a window opens with the
account N ° (code transmitter).
Click above, validate the request of remote maintenance
by clicking on OK, then to make an import to get back the
programming of the site.
