Videofied VIA-Pro, Руководство пользователя

Страница: 14 / 23

Advanced System Operation
Changing the System Level
When changing the system level, you
are required to enter an access code
when increasing the level. No code is
required when changing to a lower level.
1. With the display showing the date/
time and current level, press the right
arrow button once. The display shows
ACCESS LEVEL (current level 1 - 4).
2. Press YES. The display shows a
colon (:) between LEVEL and the
number.
3. Press either arrow button until the
desired level number appears, then
press YES. If increasing the level, the
display shows BADGE OR CODE.
4. Enter the appropriate access code
(one assigned to the level selected in
step 3), then press YES. The display
shows the new level.
Programming and
Deleting Access Codes
Your security system allows you to
program up to 20 different access codes.
This gives each individual system user
their own access code with specific
abilities or restrictions.
Just as important, access codes can
and should be deleted when they are
no longer needed. This helps prevent
unauthorized system access and also
helps you maintain the integrity of
your system.
Programming Access Codes
Use the table on the next page to record
and keep track of system access codes.
Access codes must be 4 to 6 digits,
given a name, and assigned to an access
level that determines their abilities or
restrictions. The differences between
access levels are described below.
•
Level 1 —Arm and Disarm only.
•
Level 2 —Arm, Disarm, Maintenance,
Events Log, Badges. Access Codes,
and Alarm Parameters menus.
•
Level 3 —same as Level 2.
•
Level 4 —Configuration, Maintenance,
Events Log, Badges Access Codes,
and Alarm Parameters menus.
1. Make sure the system is in
Level 2 or 3.
2. Press either arrow button until
the display shows BADGES ACCESS
CODES.
3. Press YES. The display shows
BADGE OR CODE. Enter a Level 2 or
3 access code +
YES . The display
shows ENTER A BADGE/CODE.
4. Press YES . The display shows
BADGE OR CODE.
5. Enter the desired new code + YES.
The display shows CONFIRM THE
CODE.
6. Re-enter the new code + YES . The
display shows CODE NAME:
7. Enter the desired user name + YES .
The display shows [NAME] RECORD
ED, then returns to RECORD
ING A BADGE/CODE.
8. Press the right arrow button once.
The display shows BADGES/CODES
CONFIGURATION.
9. Press YES . The display shows MODIF
NAME BADGE CODE.
10. Press the right arrow button once.
The display shows ACCESS LEVEL 3.
11. Press YES . The display shows
ACCESS LEVEL LEVEL: 3.
12. Press either arrow button until the
desired level is displayed,then press
YES
. The display shows the new
level assignment.
12